0(0)

Webinar on PASS/START-PROF – Pipe Stress analysis : What is new in 4.84

About Course

26-May-2020, 2.30 pm Indian Time

This webinar will cover PASS/START-PROF - Pipe Stress analysis Software & What’s New in 4.84 Version - Broad applicability Analyzed pipelines include: Process and power, gas and oil transportation, district heating piping, hot water supply Buried, above ground, vacuum, high pressure, high temperature, cryogenic piping Pipelines with various types of restraints, fittings and expansion joints

Description

Free webinar on PASS/START-PROF – Pipe Stress Analysis Software and What’s New in 4.84 version

Overview

PASS/START-PROF provides comprehensive pipe stress, flexibility, stability, and fatigue strength analysis with related sizing calculations according to international and national codes and standards. First introduced in 1965, PASS/START-PROF combines a highly efficient solver, powerful analysis features, a user friendly GUI, an intuitive 3D graphical pre/ post-processor, and a detailed help system with embedded intelligence from generations of piping design experts.

In PASS/START-PROF users can start working immediately, with minimal experience. Companies can put PASS/START-PROF into application immediately after purchase, significantly reducing costs in time saved without compromising on the quality of end results. Even a beginner can deliver good quality pipe stress analysis using PASS/START-PROF with minimal training and guidance.

PASS/START-PROF is so smart that you need just draw the piping like in 3D modeling software and push the button “run analysis”. PASS/START-PROF user should think about piping design, not about node numbering, model creation, etc. PASS/START-PROF will tell you if your model has any problems and show where exactly. All checks are made automatically: stresses, support loads, expansion joint deformations, flange leakage, buckling, loads on springs in all operating modes, stresses in insulation, and stresses in flaws. Table cells with a problem are marked with a red color. All results can be presented in any coordinate system: global, local. PASS/START-PROF offers detailed pipe stress report with all equations that was used; you can check all equations manually.

Process and piping engineers of more than 3,000 companies in many countries already use the software every day for stress analysis and design of different types of pipelines.

PASS/START-PROF has a smart, intuitive and friendly user interface and user’s manual in English, Chinese, and Russian languages.

In PASS/START-PROF everything is simple and straightforward, since you are working with modern object model. You can compose your piping using objects like pipe, bend, tee, reducer, cap, expansion joint, restraint, valve, flange, and other like in 3D modeling software. You don’t have to bother with node numbering at all; you can modify your model at any moment using copying, rotating, mirroring, node renumbering, cut, copy, paste any part of the model, add nodes, delete nodes.

To use ASME B31J in PASS/START-PROF you can just turn on the option “ASME B31J”. To model buried pipelines just select that pipe is buried. No need to convert whole model using other software.

PASS/START-PROF is successfully used in many industries:

  • Power and District Heating
  • Oil and Gas
  • Process
  • Chemistry
  • Metallurgy
  • Other Industries

 

What Will I Learn?

  • Learning about Pipe Stress Analysis
  • Learning about Modeling Supports, Checking Allowable Loads, Checking Stresses
  • Learning about different load cases
  • Learning about different code standards
  • Learning about different pipe types and modeling

Topics for this course

01h

Brief START-PROF Software History

Model Creation Tools

Modeling Supports, Checking Allowable Loads, Checking Stresses

Operation Mode Editor (Load Cases), Seismic, Wind, Snow, Ice Loads

Spring Selection

Expansion Joints Modelling

Flange Leakage Check

Creep Stress Analysis, Self-Cold-Spring Effect Due to Creep

Pressure Vessel, Column, Tank Modelling

Buried Piping Analysis

FRP/GRP/GRE Piping Stress Analysis

HDPE Piping Stress Analysis

ASME B31J Implementation

Finite element Analysis of Tees, Laterals with D/t>100

Import from CAESAR II

About the instructors

4.00 (5 ratings)

18 Courses

452 students

Free

Material Includes

  • Webinar Recordings
  • Materials on PASS/START-PROF

Requirements

  • Knowledge of Process Flow
  • Knowledge of Pipe stress

Target Audience

  • Process Engineers
  • Piping Engineers
  • Pipe Stress Analysis Engineers
  • Pipe Design Engineers, Managers
Virtual Engineering
# 28 (Old No 619/1), 2nd Floor
36th Cross, 2nd Block, Rajajinagar
Bangalore-560010 India
info@virtual-engineering.com